DGI HERCULES - 74" Industrial Sublimation Printer
The HERCULES, is an entry-level textile printer that embodies their commitment to cutting-edge technology.
Boasting a width of 74", the HERCULES sets itself apart with advanced features and unmatched performance. It is powered by two PrecisionCore Micro TFP i3200 heads, which work in tandem with genuine F173 ink and exclusive waveform technology. With 2.5L bulk ink tanks, it enables uninterrupted production for up to 6 hours, supporting rolls up to 656 linear feet (200m).
To ensure smooth and error-free printing, the HERCULES is equipped with carriage collision sensors and a vacuum suction capping station. Additionally, its carriage speed control adds an extra layer of precision.
The HERCULES is not just a printer; it is a testament to DGI's dedication to excellence.
Cutting Edge Features
Head Collision Sensor
Prevents head strikes by stopping the carriage when it detects contact with an obstacle during printing.
Capping Station
Reduces cleanings, and recovers nozzle dropouts due to exposure without requiring the need to print.
I3200 Print Heads & F173 Ink
A special waveform was developed by DGI to enhance printing through the I3200 heads.
2.5L Ink Tanks
High-capacity ink tanks allow for continuous, unattended printing to extend production.
Take-Up System
Consistent tension with max load of 656 linear feet (200 linear meters)
Dual Dryers with Rear Take Up
Ensures ink will dry at production speed without degrading the structural integrity of the paper.
Carriage Speed Control
Adjust carriage speed for optimum control over print quality range - Normal Quality, High Quality.
2.5-12.5PL DropSize
Wide Picoliter droplets with variable dots offers greater control to ensure high resolution printing.
Print Head
Piezo (PrecisionCore micro TFP I3200) (2 head)
Ink
DGI F173
Drop Size
2.5~12.5 PL Variable Dot
Media
Transfer Paper
Print Mode
Uni-Direction / Bi-Direction
Interface
TCP / IP, USB 3.0
Resolution
Max. 720 x 1,800 DPI
RIP Software
Ergosoft Ver. 15 (Optional : Wasatch, Caldera)
Color
4 Colors (Cyan, Magenta, Yellow, Black), Included with printer
Operating Environment
Temperature: 60~82°F (16~28°C)
Humidity : 35~65%
Humidity : 35~65%
Electricity
Single Phase, 110V, 50/60Hz, 26A/(Printer:11A,Dryer: 15A)
Max Print Width
74.8” (1900mm)
Max Media Load
76.3” (1,944mm) Dia: 7.8” (200mm) / Wt : 66 lbs.
Dimensions Crated
122.44”(L) x 38.97”(W) x 62.99”(H)
Dimensions Uncrated
117.32”(L) x 33.07”(W) x 42.91”(H)
Weight Crated
1,455 lbs. (660Kg)
Weight Uncrated
815 lbs. (370Kg)
Main Scan (DPI)
Mode
Sub Scan (DPI)
Speed
Pass
DBF Mode
720
Normal
600
97
2
Print Speed
360
1800
66
3
Feather/ No Feather
720
1200
51
4
1800
51
8